DSpace width= university logo mark
Japanese | English 

KURA > B. 理工学域・研究域/理工学部/自然科学研究科 > b10. 学術雑誌掲載論文 > 1.査読済論文(工) >


ファイル 記述 サイズフォーマット
TE-PR-YATOMI-C-976.pdf626.88 kBAdobe PDF
タイトル: 混合モード荷重下にある異方弾性体内のき裂のエネルギ解放率の数値解析
その他のタイトル: Numerical Analysis for the Energy Release Rate of Crack in Anisotropic Body under Combined Loadings
著者: 橋本, 堅一
鱸, 洋一
矢富, 盟祥
Hashimoto, Ken-ichi
Suzuki, Yoichi
Yatomi, Chikayoshi
発行日: 1997年 8月15日
出版社(者): 日本材料学会
雑誌名: 材料 = Journal of the Society of Materials Science, Japan
ISSN: 0514-5163
巻: 46
号: 8
開始ページ: 976
終了ページ: 980
キーワード: Anisotropic elastic body
Fracture mechanics
Finite element method
Crack propagation
Path-indepenedent integral
Energy release rate
Crack kinking
Combined mode loading
抄録: For a crack in an anisotropic elastic body subjected to remote inclined load under a plane stress condition, the energy release rate at the onset of crack kinking is analyzed by numerical analysis. The analysis is based on the path-independent E-integral using the finite element method. The E-integral gives the energy release rate at the onset of crack kinking for hyperelastic bodies. The eight-noded and six-noded isoparametric finite elements are used and the integral paths lie along the sides of the finite element. The numerical integration of the E-integral formula can be evaluated directly by using the nodal forces and nodal displacements. After the path independency is examined in an isotropic elastic body subjected to the remote constant tension stress, it is shown that the results for inclined loads agree very well with the results by Wu (1978). For the anisotropic bodies, in the cases of different planes of symmetry, the energy release rate is computed first under the perpendicular loading to the carck surface and then under the inclined loading. For the former, the results agree well with the perturbation solutions by Gao and Chiu (1992). For the inclined load, the direction of the maximum energy release rate is more sensitive to the direction of loading than the direction of the plane of symmetry.
URI: http://hdl.handle.net/2297/12187
資料種別: Journal Article
権利関係: 日本材料学会;本文データは日本材料学会の許諾に基づきCiNiiから複製したものである
版表示: publisher

このアイテムを引用あるいはリンクする場合は次の識別子を使用してください。 http://hdl.handle.net/2297/12187



Valid XHTML 1.0! DSpace Software Copyright © 2002-2010  Duraspace - ご意見をお寄せください