DSpace width= university logo mark
Japanese | English 

KURA > B. 理工学域・研究域/理工学部/自然科学研究科 > b10. 学術雑誌掲載論文 > 1.査読済論文(工) >


ファイル 記述 サイズフォーマット
TE-PR-HIROSE-Y-215.pdf989.39 kBAdobe PDF
タイトル: A study on stress corrosion cracking of fine grain steel
著者: Huang, Zhijian
Gotoh, Masahide
Shozu, Masayuki
Hirose, Yukio link image
後藤, 昌英
廣瀬, 幸雄
発行日: 2006年
出版社(者): International Society of Offshore and Polar Engineers
雑誌名: Proceedings of the International Offshore and Polar Engineering Conference
ISSN: 1098-6189
巻: 2006
開始ページ: 215
終了ページ: 220
キーワード: Fine grain steel
Residual stress
SEM fractography
Stress corrosion
抄録: It is known that fine grain steel possesses high strength according to Hall-Petch relation and therefor many researchers are examining to use the fine grain steel on civil engineering and architecture fields as next generation's high strength material. Then the evaluation of corrosion resistance property to fine grain steel is very important. In this study, Stress Corrosion Cracking test was done on specimens of the fine grain steel and conventional steel. Afterwards fracture surfaces were observed with SEM (Scanning Electron Microscope) and the residual stresses under the fracture surfaces were measured by X-ray stress measurement. The difference of stress corrosion resistance property between fine grain steel and conventional steel was clarified. Copyright © 2006 by The International Society of Offshore and Polar Engineers.
URI: http://hdl.handle.net/2297/19677
資料種別: Conference Paper
版表示: publisher

このアイテムを引用あるいはリンクする場合は次の識別子を使用してください。 http://hdl.handle.net/2297/19677



Valid XHTML 1.0! DSpace Software Copyright © 2002-2010  Duraspace - ご意見をお寄せください