DSpace width= university logo mark
Japanese | English 

KURA > B. 理工学域・研究域/理工学部/自然科学研究科 > b10. 学術雑誌掲載論文 > 1.査読済論文(工) >


ファイル 記述 サイズフォーマット
TE-PR-TACHIYA-H-79-805.pdf551.58 kBAdobe PDF
タイトル: 産業用ロボットの CP 制御における動力学モデルを用いない最適軌道生成
その他のタイトル: Generating optimized trajectories of industrial robots in CP motion without kinetic models
著者: 立矢, 宏 link image link image
伊谷, 英之
林, 道大
伊賀, 裕和
樋口, 理宏 link image link image
Tachiya, Hiroshi
Itani, Hideyuki
Hayashi, Michihiro
Iga, Hirokazu
Higuchi, Masahiro
発行日: 2013年
出版社(者): 日本機械学会 = Japan Society of Mechanical Engineers
雑誌名: 日本機械学會論文集. C編 = Transactions of the Japan Society of Mechanical Engineers. C
ISSN: 0387-5024
巻: 79
号: 805
開始ページ: 3075
終了ページ: 3087
キーワード: Heuristic Algorithm
Kinetic Model
Motion Control
抄録: This study proposes a method of generating the optimized trajectory, which determines change of the displacement of a robot with respect to time, to reduce electrical energy or the peak current value occurred in motors. Previously, a lot of studies tried to optimize the trajectory of a robot, needing its kinetic model to obtain the input torque or energy as the evaluation value. However, the construction of the kinetic model is considerably difficult, because it needs to identify or to measure a lot of specifications of a robot. Thus, the present study proposes the method that obtains the evaluation value by measuring the currents, powers and so on of an actual robot in operation. Therefore, it does not need the analysis of the motion of a robot with the kinetic model. The proposed method optimizes the trajectories with a heuristic procedure by evaluating the measured values. In this study, we addressed the optimization method for continuous path controlled robots and applied it to a commercially available industrial manipulator, confirming that the generated trajectory can reduce electrical energy and the peak current value in a short time. © 2013 The Japan Society of Mechanical Engineers.
DOI: 10.1299/kikaic.79.3075
URI: http://hdl.handle.net/2297/36261
資料種別: Journal Article
権利関係: © 2013 The Japan Society of Mechanical Engineers
版表示: author

このアイテムを引用あるいはリンクする場合は次の識別子を使用してください。 http://hdl.handle.net/2297/36261



Valid XHTML 1.0! DSpace Software Copyright © 2002-2010  Duraspace - ご意見をお寄せください